Everything we do serves a single purpose:
to give our customers a head start.
We see the satisfaction of our customers as the focus of all our efforts.
We see innovative and committed employees who think and act in accordance with our quality goals as the most important prerequisite.
We strive for continuous improvement.
We greatly value flexibility and a willingness to take responsibility in our employees.
For us, dedication, and the readiness to give of one’s best for the company, are essential.
We want our employees to feel like valuable members of the team.
Commitment and a solutions-oriented approach are qualities that we both appreciate and expect.
We consider loyalty and employee identification with the company to be indispensable.
WELCOME TO THE TEAM
Job vacancies
UG SYSTEMS
is a growing company that can offer you long-term prospects with excellent development opportunities. Our solutions are used in sectors that are undergoing rapid technological development. Are you a dynamic personality who is enthusiastic about technology at the highest level? Our team looks forward to meeting you!
YOUR BENEFITS:
- Integration in a committed and innovative team of specialists
- Challenging and varied work
- Opportunity to quickly assume responsibility
- Modern working conditions
- Company vehicle (also for private use)
- Additional company health insurance
- Interesting projects and contacts
- Creative freedom and autonomy
- Short decision-making paths
- A permanent position with an attractive salary
- Flexible working times
- Home office (temporary)
- Joint sporting activities
- Jobrad (bike leasing)
- Employee offers
Industrial electrician | M/F/D
special machine construction
Your tasks:
- Planning and integration of complex electrical installations and wiring in control cabinets and special machines according to the corresponding electrical plan
- Electrical integration of purchased components (robots, cameras, etc.)
- Installation of pneumatic components and sensors
- Reading and interpreting electrical circuit diagrams
- Fault analysis and rectification of faults in electrical systems
- Collaboration with other departments to ensure smooth processes
- Professional execution and documentation of CE and VDE tests
Our requirements:
- Completed training as an electrician or comparable qualification
- Experience in special machine construction is an advantage
- Knowledge of programming control systems
- Independent, structured and responsible way of working
- Ability to work in a team and strong communication skills
- Willingness to travel occasionally at home and abroad
Industrial mechanic | M/F/D
special machine construction
Your tasks:
- Assembly and adjustment of mechanical components in special machines
- Carrying out maintenance work and repairs
- Collaboration with the other teams to integrate and commission mechanical and electrical components
- Working with technical drawings
- Reworking and adjustments to mechanical components
- Quality control and documentation of the work carried out
Our requirements:
- Completed training as a mechanic or comparable qualification
- Experience in the field of special machine construction is an advantage
- Knowledge of machine assembly and maintenance
- Careful and precise way of working
- Ability to work in a team and strong communication skills
- Willingness to travel occasionally at home and abroad
Application engineer | M/F/D
in special machine construction
Your tasks:
- Analysis of customer requirements and development of individual solution concepts
- Technical support and advice during the implementation phase
- Adaptation of software and control systems to customer-specific requirements
- Training customers in the use of our special machines
- Close cooperation with internal development teams to continuously improve products
Our requirements:
- Degree in mechanical engineering, electrical engineering or comparable qualification
- Experience in special machine construction and knowledge of control technology
- Programming skills, preferably in C#, TIA Portal, Labview
- Strong customer orientation and communication skills
- Willingness to travel occasionally
Mechatronics technician | M/F/D
for service activities in special machine construction
Your tasks:
- Technical support for customers during commissioning, maintenance and troubleshooting
- Commissioning of special machines
- Carrying out functional tests
- Carrying out training courses for customers in the use of our special machines
- Close cooperation with internal development and sales teams
- Documentation and reporting of service activities
- Customer support (on site)
Our requirements:
- Completed training as a mechatronics technician or comparable qualification
- Experience in special machine construction and sound knowledge of mechanics and electronics
- Service and customer-oriented way of working
- Strong communication skills and enjoy solving technical challenges
- Willingness to travel
SOFTWARE DEVELOPER | M/F/D
IMAGE PROCESSING
Your tasks:
- Further development of the proprietary software systems with a focus on image processing
- Development, integration and testing of new, innovative technologies (AI systems, deep learning, laser processes, 3D imaging, shape from shading)
- Solving individual image processing tasks
- Investigating and evaluating new imaging processes and products in the automation environment
- Integration of new processes and products into our systems
- Interface programming for new hardware
Our requirements:
- Training as an IT specialist, studies in computer science/electrical engineering or a comparable education
- Excellent knowledge of C#, .NET Framework and object-oriented programming
- Strong expertise in image processing
- Preferably experience with the HALCON (MVTec) software library
- Ability to work in a team, flexibility, systematic approach
- Confident knowledge of English and willingness to travel at national and international destinations would be an advantage
Software Developer | M/F/D
Labview + Teststand
Your tasks:
- Design and development of new, innovative systems
- Automation of test systems
- Development of LabVIEW-based systems
- Testing and documenting the systems
Our requirements:
- Studies in electrical engineering/mechanical engineering/mechatronics/computer science or a comparable education
- Experience of NI LabVIEW and TestStand
- Knowledge of C#, .NET Framework and object-oriented programming
- bility to work in a team, flexibility, systematic approach
- Confident knowledge of English and willingness to travel at national and international destinations would be an advantage
PROJECT MANAGER | M/F/D
Your tasks:
- Project-related internal and external first contact person
- Time and budget responsibility and controlling
- Control of project activities and coordination with the relevant departments
- Preparation of project schedules and work breakdown structures
- Allocation of tasks, coordination and resource planning for the team
- Monitoring compliance with guidelines and procedural/work instructions
- Project documentation and project post-calculation
- Customer support and implementation of customer appointments
- Task distribution, coordination and resource planning of the team
- Motivation of the team
- Clear communication
Our requirements:
- Degree in electrical engineering, mechanical engineering, industrial engineering or comparable training.
- Experience in project management in the international plant business desirable, preferably special machine construction in the automotive industry
- Ideally knowledge of electrical engineering and software development
- Entrepreneurial thinking & acting
- Ability to make decisions independently
- Interdisciplinary thinking and acting
- High level of initiative
- Confident knowledge of English and willingness to travel at national and international destinations would be an advantage
ROBOT PROGRAMMER | M/F/D
Your tasks:
- Setup & programming of industrial robots
- Setup of our robot systems in our factory as well as at our customers' sites
- Creation of structured control programs (logic, vectors, arithmetic, bus systems, communication with higher or lower-level controllers)
- Process optimisation
- Customer training on the systems
- Service & error analysis for our customers
- Development and optimisation of our own robot standard programs
Our requirements:
- University graduate/master craftsman/technician in an electrotechnical profession
- Very good technical knowledge in electrical or automation engineering
- Very good expertise in programming and commissioning industrial robots
- Experience with PLC or plant programming is desirable
- Experience in safety technology in mechanical engineering is advantageous
- Independent way of working
- Ability to work in a team, flexibility, systematic approach
- Confident knowledge of English and willingness to travel aat national and international destinations would be an advantage
SOFTWARE DEVELOPER | M/F/D Windows (C#)
Your tasks:
- Further development of the proprietary software and programming systems
- Design and development of new, innovative software systems
- Testing and documenting the software systems
Our requirements:
- Training as an IT specialist, studies in computer science/electrical engineering or a comparable education
- Excellent knowledge of C#, .NET Framework and object-oriented programming
SOFTWARE DEVELOPER | M/F/D EMBEDDED (C)
Your tasks:
- Further development of existing embedded software
- Design and development of new, innovative embedded applications
- Testing and documenting the software
Our requirements:
- Training as an IT specialist, studies in computer science/electrical engineering or a comparable education
- Excellent knowledge of C and microcontroller technology
- Experience in ASPICE advantageous
- Ability to work in a team, flexibility, systematic approach
- Confident knowledge of English
ENGINEER | M/F/D
FOR ELECTRICAL AND SYSTEMS ENGINEERING
Your tasks:
- Design and development of new, innovative systems
- Automation of test systems
- Development of robot-assisted systems
- Testing and documenting the systems
Our requirements:
- Studies in electrical engineering/mechanical engineering/mechatronics or a comparable education
- Experience of selecting and designing electrical components and systems
- Programming skills in C#, .NET Framework and object-oriented programming
- Ability to work in a team, flexibility, systematic approach
- Confident knowledge of English and willingness to travel at national and international destinations would be an advantage
TECHNICAL DRAWER/PRODUCT DESIGNER | M/F/D
Your tasks:
- Drawing creation, parts list creation and detailing of construction drawings for assemblies and components in special machine construction
- Conception of customer-specific solutions
- Support in the design and selection of components
- Supporting the work preparation
- Creation of documentation
Our requirements:
- Completed vocational training as a technical draughtsman (m/f/d), technical product designer (m/f/d) or comparable
- Ideally professional experience in special machine construction
- Good user skills in Autodesk Inventor or comparable
- Structured and careful way of working
- High level of personal responsibility and reliability
- Ability to communicate and work in a team
DEGREE THESES
Possible tasks:
- Image processing
- Robot control
- Programming of test systems (C# or LabVIEW)
- Design of test systems
- Automation of test systems with robot assistance
- Development in the area of embedded systems
Our requirements:
- Initial experiences in the required area
TRAINEE | M/F/D
WORKING STUDENT | M/F/D
Possible tasks:
- Development of interface drivers
- Maintenance of existing software systems
- Testing of software systems
Our requirements:
- Knowledge of C#, .NET Framework and object-oriented programming
We look forward to your application
and are happy to answer any questions you may have.
- Manuela Schweizer
- ORGANIZATION
- T +49 951 700 858 14
- info(at)ug-systems.com
OUR NEW HEADQUARTERS
By 2026, our new company headquarters will provide us with more space for the development and production of your individual test environments.
News
The “Weihnachtspäckchenkonvoi” is back on the road!
December 2023. 2023 we continue to live in unusual times, so it’s all the more important to keep our eyes on what connects us. This year, we will once again be lending our heartfelt support to the Christmas Parcel Convoy – to bring joy to children in Eastern Europe, and send out a signal of solidarity.
Automotive Testing Expo Stuttgart
June 2022. Finally we could get a taste of the trade fair air again! After a two-year break we were at the Automotive Testing Expo in Stuttgart from June 21st to 23rd, the leading international trade fair for test technologies. It attracted mor than 400 exhibitors and their very latest products and services. Our exhibition focus was on test automation in general and its compatibility with assembly technology in particular this year. We look back on varied days with good conversations!
UG SYSTEMS is committed to sustainability
October 2021. We are proud to have received the EcoVadis bronze medal for the sustainability recognition level in October. EcoVadis is one of the world’s largest provider of business sustainability ratings and has meanwhile built a global network of more than 75,000 companies. This medal recognizes the important efforts our employees and the company are making in creating a more sustainable world.
Successful presence on the ZVO-Oberflächentage
September 2019. This year, we participated for the first time as an exhibitor at the ZVO-Oberflächentage in Berlin and successfully introduced the next generation of optical surface inspection. Click here to visit the website.
UG SYSTEMS at the Automotive Testing Expo
June 2019. Also this year we represented UG SYSTEMS at the Automotive Testing Expo in Stuttgart. The world's largest trade fair for testing technologies with over 480 exhibitors attracted more than 9,000 visitors. We mainly focussed on testing of surfaces and lighting components.
Investment in the company Kühne+Vogel
December 2018. Due to the acquisition of shares in the company Kühne+Vogel Sondermaschinen GmbH, the cooperation that has existed for many years is being intensified, and UG SYSTEMS is expanding in the areas of production and automation technology. In future, due to greater resources and area, we will be capable of working on even larger projects within the group of companies.
UG SYSTEMS is celebrating its birthday
August 2018. We are celebrating our 10th anniversary! The UG SYSTEMS team can look back on an eventful decade, during which we established ourselves as a leading provider of test systems. In future, we will continue to do our utmost to satisfy the requirements and desires of our customers.
New UG SYSTEMS production site
January 2018. UG SYSTEMS is expanding its capacities to ensure the usual delivery reliability despite rising demand. A new production site with 1,500 m2 of assembly space is currently being built in Kemmern near Bamberg.
CERTIFICATES AND COOPERATIONS
Recognized competence: Distinguished certificates of achievement and our involvement in leading international networks give you the reliability of a strong solution partnership. Would you like to know more about our qualification profile? We will gladly provide you with detailed information.
Quality management system
Supplier Recognition 2017
